Note1 : Selects the System Reverb preset type. Receipt of GM/GS Reset selects Standard Hall. This is the value of this
Type is also linked to each of the System Reverb parameters and to the System Reverb Return Level parameter, and changes them
to prescribed values. For details about the preset type list, see 25.8 Reverb Type Setting Value Table .
19.5 Brilliance Parameters
Parameter ID R/W Block Size Array Min-Def-Max Description
Type 00A0 R/W 000000 7 01 00-00-01 0...For Speaker
1...For Phones
Mid6 Gain 00AE R/W ↑ 7 01 00-0C-18 -12 - 0 - +12 (Brilliance) (Note1)
Note1 : Selects Master EQ mid 6 (Brilliance) gain. See 25.11 Brilliance Gain Setting Value Table .
19.6 Part Parameters
Parameter ID R/W Block Size Array Min-Def-Max Description
Part Enable 00E0 R/W 20-6: 0 1 01 00-01-01 0...Off
5-0: Part # 1...On
Tone Num 00E1 R/W ↑ 14 01 0000-0000-3FFF 0-16383
Fine Tune 00E2 R/W ↑ 10 01 0000-0200-03FF -100 - 0 -
+99.8(cent)(1unit=100/512cents)
Coarse Tune 00E3 R/W ↑ 7 01 28-40-58 -24 - 0 - +24(semitone)
Scale Tune Enable 00E4 R/W ↑ 1 01 00-00-01 0...Disable
1...Enable
Volume 00E5 R/W ↑ 7 01 00-64-7F 0-127
Acmp Volume 00E6 R/W ↑ 7 01 00-7F-7F 0-127
Pan 00E7 R/W ↑ 7 01 00-40-7F -64 - 0 - +63
Cho Send 00E8 R/W ↑ 7 01 00-00-7F 0-127
Rev Send 00E9 R/W ↑ 7 01 00-28-7F 0-127
Acou Reso Send 00EA R/W ↑ 7 01 00-00-7F 0-127
Bend Range 00EC R/W ↑ 7 01 00-02-18 0-24
37
To Next Page
Loading...
Need help?
General
