– 22 –
DIAGNOSTIC PROGRAM
Initial Setting
1. Connect the AC adaptor.
2. "Main" volume: MAX
3. Prepare a PC* with USB cable connected for USB check.
4. Insert a SD CARD.
* Operating System
Windows® XP (SP2 or later)*1
Windows Vista® *2
Mac OS® X (10.3.9, 10.4.11 or later, 10.5.2 or later)
*1: Windows XP Home Edition
Windows XP Professional (32- bit)
*2: Windows Vista (32- bit)
How to start diagnostic program
1. Press and hold the "0", "1" and "2" buttons.
2. Press the "POWER" button.
3. The massage "TESTMODE" is appears on LCD.
4. Release the "0", "1" and "2" buttons.
To Next Page
Loading...
Need help?
General
