46
21 Patch Parameter
The patch parameter is a temporary area that controls the sound source operation mode. Mixer settings, synthesizer
function, DSP function and other editable parameters are also included in these areas.
The content of this area is rewritten whenever preset data or user data is selected and manipulated. The parameters
in this area are written into the user area whenever data is written into any user data area.
21.1 Patch Common Parameter List
This list shows setting parameters that are common for each part.
System Exclusive Format
MIDI Parameter List
Note 1:
This parameter sets the SysEx Device ID.
Tune / Mix Parameter
Field Value
01 SYSEX F0
02 MAN 44
03 MOD 11,02
04 dev Either 00 to 1F, or 7F
05 act 00(IPC), 01(IPR)
06 cat Patch = 01
07 prm 00-7F
08 ilen/dlen 0 / bit size - 1
09 ps LSB,MSB = 00, 00
10 index Indicates Bar Number in the case of
Drawbar Bar Position.
0 in any other case.
11 data See the Parameter List
12 sum None
13 EOX F7
ParamID Parameter bit Value Default Setting Value (Decimal)
00 MIDI Device ID (Note 1) 07 00-1F 10 0-31
01 MIDI Global Channel 04 00-0F 00 1-16
ParamID Parameter bit Value Default Setting Value (Decimal)
04
Master Fine Tune (Note 1)
08 00-FF 80 -100 to 0 to 99cent
05
Master Coarse Tune (Note 2)
07 28-58 40 -24 to 0 to 24semi
08 Master Volume 07 00-7F 7F 0-127
09 Master Pan (Note 3) 07 00-7F 40 -64 to 0 to 64
0A
Chorus Send To Reverb (Note 4)
07 00-7F 00 0-127
0B DSP Line Bypass (Note 5) 01 0-1 0 0...Effect
1...DSP Bypass
To Next Page
Loading...
Need help?
General
