E-61
Song Memory Function
Channels 11 through 16 correspond to Tracks 1 through 6.
Whenever the keyboard is in record or edit (page E-62)
standby, the level meter display shows which tracks already
contain recorded data and which are still empty. Tracks with
four lit segments already contained recorded data, while
tracks with one lit segment are not yet recorded.
1 Recording track
2 Not recording track
Memory data can be thought of as a musical score that
progresses from left to right, with the input point normally at
the far right of the recorded data.
The procedure described here lets you move the input point
to the left in order to make changes in data you have already
input. Note, however, that moving the input point to the left
and changing data automatically deletes all of the data
recorded to the right of the input point.
1. Without exiting step recording, use the [ ]
CURSOR button to move the input point to the
left.
The REC indicator disappears from the display,
and the STEP indicator flashes.
2. Monitoring the data on the display, use the [ ]
and [ ] CURSOR buttons to move the input
point to the data you want to change.
Example:
To re-record all note data following the note A3
located at Measure 120, Beat 1, Clock 0.
Level Meter Contents During Record/Edit
Standby
Correcting Mistakes While Step
Recording
To correct mistakes while step recording
705A-E-063A
CTK691E01‑01.book61ページ２００３年９月２９日 月曜日 午後４時４７分
To Next Page
Loading...
Need help?
General
