Keyboard Settings
E-66
Keyb oard Se ttings
Up to four parts (numbered 1 through 4) can be used
simultaneously during keyboard play. These parts can be
used by the layer and split functions explained below.
Layer lets you assign two different tones (a main tone and a
layered tone) to the keyboard, both of which play whenever
you press a key. For example, you could layer the FRENCH
HORN GM tone on the BRASS GM tone to produce a rich and
brassy sound.
J LAYER
1. First select the main tone.
Example:
To select “361 BRASS GM” as the main tone,
press the TONE button and then use the number
buttons to input 3, 6 and then 1.
2. Press the LAYER button.
1
Selected layer tone
2 Pointer
3. Select the layered tone.
Example:
To select “360 FRENCH HORN GM” as the
layered tone, use the number buttons to input 3,
6 and then 0.
4. Now try playing something on the keyboard.
Both tones are played at the same time.
1 MODE 2 TRANSPOSE/FUNCTION 3 TONE
4 EXIT 5 DSP 6 SPLIT
7 LAYER 8 [ ]/[ ]/[ ]/[ ] CURSOR 9 Number buttons
bk [
+
]/[–], YES/NO
Parts
Part 1: Main tone part
Part 2: Layered tone part
Part 3: Split tone part
Part 4: Layered and split tone part
Using Layer
To layer tones
705A-E-068A
CTK691E01‑01.book66ページ２００３年９月２９日 月曜日 午後４時４７分
To Next Page
Loading...
Need help?
General
