E-34
Registration Memory
Number buttons
REGISTRATION STORE
BANK
Registration Memory Features
Registration memory lets you store up to 32 keyboard setups
(4 sets × 8 banks) for instant recall whenever you need them.
The following is a list of settings that are saved in registration
memory.
Registration Memory Settings
• Tone
• Rhythm
• Tempo
• Layer on/off
• Split on/off
• Split point
• Effect settings
• Touch Response settings
• Assignable jack setting
• Synchro standby state
• Pitch Bend range
NOTE
• Each bank of registration memory initially contains data
when you first use the keyboard. Simple replace the
existing data with your own data.
Setup Names
You can assign setups into one of 32 areas, which you can
select using BANK button and the four REGISTRATION
buttons. Area names range from 1-1 through 8-4 as shown
below.
1 Use the BANK button to select the bank. Each press of
BANK cycles through the bank numbers from 1 to 8.
2 Pressing one of the REGISTRATION buttons (1 to 4) selects
the corresponding area in the currently selected bank.
NOTE
• Whenever you save a setup and assign it a setup name,
any setup data previously assigned to that name is
replaced with the new data.
21
1-1BANK 1 1-2 1-3 1-4
2-1BANK 2 2-2 2-3
2-4
4-1BANK 4 4-2 4-3 4-4
5-4
3-1BANK 3 3-2
3-3
6-1BANK 6 6-2 6-3 6-4
5-1BANK 5 5-2
5-3
7-1BANK 7 7-2 7-3
7-4
8-1BANK 8 8-2 8-3 8-4
3-4
123
4
CTK810IN_e_28-35.p65 07.4.10, 3:47 PM34
To Next Page
Loading...
Need help?
General
