Casio CTK-8IOin User Manual

E-54
Deleting Registration Data from an
SD Memory Card
1 Hold down the CARD button until the card icon
and the message “LoadReg” appear on the display.
2 Press the CARD button twice.
• This will cause “DelReg” to appear on the display.
3 Use the number buttons or the [+]/[–] buttons to
select the file number where the data you want to
delete is located.
4 Press the METRONOME/ENTER button.
• This will cause “Sure?” to appear on the display.
5 Press the [+] (Yes) button to delete the data.
• The message “Complete” will appear on the display
to let you know when the delete operation is complete.
After that, the display will return to the file selection
screen in step 3.
• To cancel the operation, press the [–] (NO) button in
place of the [+] (YES) button. This will return to the
file selection screen in step 3.
• If an error message appears, see “Memory Card Error
Messages” on the following page for information
about what you need to do.
Using a Memory Card
4 Press the METRONOME/ENTER button.
• The message “Replace?” will appear if the file whose
number is selected already contains data. Press the
[+] (Yes) button to replace the data. To cancel the
operation, press the [–] (NO) button in place of the
[+] (YES) button. This will return to the screen in step
3.
• The message “Complete” will appear on the display
to let you know when the save operation is complete.
After that, the screen will return to what it showed
before you held down the CARD button in step 1.
• If an error message appears, see “Memory Card Error
Messages” on the following page for information
about what you need to do.
Loading Data from an SD Memory
Card into Registration Memory
1 Hold down the CARD button until the card icon
and the message “LoadReg” appear on the display.
2 Use the number buttons or the [+]/[–] buttons to
select the file number where the data you want to
load is located.
3 Press the METRONOME/ENTER button.
• This will cause “Replace?” to appear on the display.
4 Press the [+] (Yes) button to load the data.
• The message “Complete” will appear on the display
to let you know when the load operation is complete.
After that, the screen will return to what it showed
before you held down the CARD button in step 1.
• To cancel the operation, press the [–] (NO) button in
place of the [+] (YES) button. This will return to the
screen in step 1.
• If an error message appears, see “Memory Card Error
Messages” on the following page for information
about what you need to do.
LoadRe
g
LoadRe
g
De lRe
g
CTK810IN_e_51-56.p65 07.4.10, 3:47 PM54

Casio CTK-8IOin Specifications

General

Brand	Casio
Model	CTK-8IOin
Category	Electronic Keyboard
Language	English