70
Advanced Settings
Procedure
[r] (REC) * [MENU] * REC Tab * L/R Key
You can assign one of the five functions listed below to the [4] and [6] keys.
Procedure
[r] (REC) * [MENU] * REC Tab * Quick Shutter
When Quick Shutter is turned on, you can press the shutter button all the way without
waiting for Auto Focus. This will record the image using a high-speed focus operation
that is much faster than Auto Focus.
NOTE
• Quick Shutter is disabled when the zoom factor is greater. Recording is performed
using Auto Focus at this time.
Assigning Functions to the [4] and [6] Keys (L/R Key)
Setting [4]/[6] key operation
Metering Changes the Metering Mode (page 76)
EV Shift Adjusts the EV shift value (page 41)
White Balance Changes the white balance setting (page 75)
ISO Changes the ISO Sensitivity setting (page 40)
Self-timer Sets the self-timer time (page 65)
Off Cancels [
4] and [6] key assignments
Shooting with Quick Shutter (Quick Shutter)
On
Turns on Quick Shutter
• Some images may be out of focus when Quick Shutter is used.
Off
Turns off Quick Shutter so focus is performed using normal Auto Focus
before the image is recorded.
• If you press fully the shutter button while Quick Shutter is turned off,
images will continue to be shot without focusing.
• Whenever possible, take a little extra time to half-press the shutter button
in order to ensure proper focus.
To Next Page
Loading...
Need help?
General
