103
Other Settings (Set Up)
Procedure
[SET] * MENU * “Set Up” Tab * PLAY
• With “Power On/Off”, the camera turns off when you press [p] (PLAY) in the
PLAY mode.
• When “Power On” or “Power On/Off” is enabled, you can turn on the camera by
holding down [
p] (PLAY) until the back lamp lights green momentarily.
Procedure
[SET] * MENU * “Set Up” Tab * Ü Disabled
The camera will not start the image delete operation when you press [ ] (Delete)
while “Ü Disabled” is turned on.
You can protect against accidental deletion of images by selecting “On” for
“Ü Disabled”.
• Performing a format operation (page 104) will cause all images to be deleted, even
if file deletion is disabled (“On” selected for “Ü Disabled”) for some images.
Configuring [p] Setting (PLAY)
Power On Camera turns on whenever [p] (PLAY) is pressed.
Power On/Off Camera turns on or off whenever [p] (PLAY) is pressed.
Disable
Camera does not turn on or off whenever [
p] (PLAY) is
pressed.
Disabling File Deletion (Ü Disabled)
To Next Page
Loading...
Need help?
General
