39
Snapshot Tutorial
With the Self-timer, pressing the shutter button starts a timer. The shutter is released
and the image is shot after a fixed amount of time.
1. In the REC mode, press [SET].
2. Use [8] and [2] to select the “Self-timer” Control Panel option (page
33).
3. Use [4] and [6] to select the setting you want and then press [SET].
• The front lamp flashes while the Self-timer countdown is
in progress.
• You can interrupt an ongoing Self-timer countdown by
pressing [SET].
NOTE
• The Self-timer cannot be used together with the following features.
CS, some BEST SHOT scenes
• The Triple Self-timer cannot be used together with the following features.
Movie, Make-up, some BEST SHOT scenes
Using the Self-timer (Self-timer)
Setting
REC Screen
Icon Display
Description
10sec
Self-timer
10-second Self-timer
2sec
Self-timer
2-second Self-timer
• When shooting under conditions that slow down
the shutter speed, you can use this setting to
prevent image blur due to camera movement.
×3 Self-
timer (Triple
Self-timer)
Shoots three images: one image 10 seconds after
the shutter button is pressed, and the next two
images as soon as the camera is ready after
shooting the previous image. How long it takes for
the camera to get ready to shoot depends on the
image size and quality settings, whether or not a
memory card is loaded in the camera, and the flash
charge condition.
Self-
timer Off
None Turns off the Self-timer.
Front lamp
To Next Page
Loading...
Need help?
General
