44
Recording Movie Images
Recording Movie Images
1. Configure the quality setting for the movie (page 36).
The length of the movie you can record will depend on the quality setting you
select.
2. In the REC mode, point the
camera at the subject and then
press [0] (Movie).
This will start recording and display Y
on the monitor screen.
Movie recording includes monaural
audio.
3. Press [0] (Movie) again to stop
recording.
• Each movie can be up to 29 minutes
long. Movie recording stops automatically after 29 minutes of recording. Movie
recording also will stop automatically if memory becomes full before you stop
movie recording by pressing [0] (Movie).
Shooting with BEST SHOT
With BEST SHOT (page 46), you can select the sample scene that matches the type
of movie you are trying to shoot and the camera will change its setup accordingly, for
beautiful movies every time. Movie Recording is disabled while certain BEST SHOT
scenes are being used.
Minimizing the Effects of Camera Movement during Movie Recording
You can configure the camera to minimize the effects of camera movement during
movie recording (page 60). Note, however, that this does not prevent image blur due
to subject movement and it makes the field of view narrower.
To record a movie
Recording time
Remaining recording time
(page 127)
[0] (Movie)
To Next Page
Need help?
General
