EasyManuals Logo
Home>Casio>Digital Camera>Exilim EX-H10

Casio Exilim EX-H10 User Manual

Casio Exilim EX-H10
189 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #150 background imageLoading...
Page #150 background image
150
Appendix
. Data Error Precautions
Your digital camera is manufactured using precision digital components. Any of the
following creates the risk of corruption of data in camera memory.
Removing the battery or memory card while the camera is performing some
operation
Removing the battery or memory card while the back lamp is flashing green after
turning off the camera
Disconnecting the USB cable while communication is in progress
Using a battery that is low
Other abnormal operations
Any of the above conditions can cause an error message to appear on the monitor
screen (page 167). Perform the action indicated by the message that appears.
. Operating Environment
Operating Temperature: 0 to 40°C (32 to 104°F)
Operating Humidity: 10 to 85% (non condensation)
Do not place the camera in any of the following locations.
In an area exposed to direct sunlight, or large amounts of moisture, dust, or
sand.
Near an air conditioner or in other areas subjected to extreme temperature or
humidity
Inside of a motor vehicle on a hot day, or in an area subjected to strong vibration
. Condensation
Sudden and extreme temperature changes, such as when the camera is moved from
the outdoors on a cold winter day into a warm room, can cause water droplets called
“condensation” to form on the interior and the exterior of the camera, which creates
the risk of malfunction. To prevent condensation from forming seal the camera in a
plastic bag before changing locations. Then leave the bag sealed to allow the air
inside to naturally change to the same temperature as the air in the new location.
After that, remove the camera from the bag and open the battery cover for a few
hours.
. Lens
Never apply too much force when cleaning the surface of the lens. Doing so can
scratch the lens surface and cause malfunction.
You may sometimes notice some distortion in certain types of images, such as a
slight bend in lines that should be straight. This is due to the characteristics of
lenses, and does not indicate malfunction of the camera.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Casio Exilim EX-H10 and is the answer not in the manual?

Casio Exilim EX-H10 Specifications

General IconGeneral
Megapixel12.1 MP
Camera typeCompact camera
Sensor typeCCD
Image stabilizerYes
Image sensor size1/2.3 \
Maximum image resolution4000 x 3000 pixels
Digital zoom4 x
Optical zoom10 x
Focal length range4.3 - 43 mm
InterfaceUSB 2.0
Digital SLRNo
Camera shutter speed1/2 - 1/2000 s
Focal length (35mm film equivalent)24 - 240 mm
Macro focusing range (wide)0.07 - 0.5 m
Auto Mode focusing range (wide)0.15 - ∞ m
ISO sensitivity64, 100, 200, 400, 800, 1600, 3200
Flash modesauto, Flash off, Red-eye reduction
Flash range (tele)0.5 - 2 m
Flash range (wide)0.2 - 3.6 m
Video formats supportedAvi
Maximum video resolution1280 x 720 pixels
Display diagonal3 \
Display resolution (numeric)460800 pixels
USB version2.0
Product colorPink
White balanceauto, Cloudy, manual, Shade, Tungsten
Camera playbackMovie
Battery life (CIPA standard)1000 shots
Number of batteries supported1
Compatible memory cardssd, sdhc
Weight and Dimensions IconWeight and Dimensions
Depth24.3 mm
Width164 mm
Height62 mm
Weight164 g

Related product manuals