99
Other Playback Functions (PLAY)
Procedure
[p] (PLAY) * Snapshot Screen * [MENU] * PLAY Tab *
Color Correction
Color Correction lets you correct the color of an old photograph. The corrected image
is saved as 2M (1600
x
1200 pixels) size.
1. Perform the above operation.
• An image of the photograph you are restoring will appear on the monitor
screen with a red boundary around it. If there is a black boundary, it means that
the camera detected more than one rectangular area in the image. Use [4]
and [6] to move the boundary and select the area of the photograph.
2. Use [8] and [2] to select “Trim”, and then press [SET].
This will display a selection boundary for trimming the on-screen image.
3. Slide the zoom controller to resize the selection boundary and specify
the image size you want.
4. Use [8], [2], [4], and [6] to move the selection boundary to it
encloses the area of the image you want to trim to and then press
[SET].
NOTE
• If the original image is smaller than 2M size, the new (corrected) version will be the
same size as the original.
• The original snapshot is retained in memory and not deleted.
• If you do not want a border around the resulting image, select an area that is
smaller than the original image.
• When you display a color corrected image on the camera’s monitor screen, the
date and time indicates when the image was originally recorded, not when the
image was color corrected.
Using Color Correction to Correct the Color of an Old
Photograph (Color Correction)
To Next Page
Loading...
Need help?
General
Weight and Dimensions
