34
Snapshot Tutorial
1. In the REC mode, press [SET].
2. Use [8] and [2] to select the third Control Panel option from the top
(AF Area).
3. Use [4] and [6] to select the setting you want and then press [SET].
4. Point the camera at the subject and half-press the shutter button. Wait
until the camera adjusts exposure and focus automatically.
5. Press the shutter button the rest of the way down.
Specifying the Auto Focus Area (AF Area)
Spot
This mode takes readings of a small area in the center of the
image. This setting works well with focus lock (page 64).
Multi
When you half-press the shutter button while this setting selected,
the camera will select the optimum Auto Focus area from among
nine possible areas. The focus frame of the area where the
camera focuses will be displayed in green.
Tracking
Pressing [4] or [6] focuses on the subject and causes the focus
frame to track the movement of the subject. Half-pressing the
shutter button performs Spot AF.
“Í Spot” or “Ë Tracking” “È
Multi”
Focus frame Focus frame
To Next Page
Loading...
Need help?
General
Weight and Dimensions
