GETTING READY
32
Configuring Display Language and Clock
Settings
Be sure to configure the following settings before using the
camera to record images.
• Display language
• Date and time
Note that the current date and time settings are used by the
camera to generate the date and time that are stored along
with image data, etc.
IMPORTANT!
• The camera’s clock settings are cleared whenever
power is totally cut off. This can happen if the battery
goes dead while the camera is not being supplied
power by the USB cradle. The clock setting screen
will appear automatically the next time you turn on
power after the settings are cleared. Set the date and
time before using the camera.
• The current date and time settings will be cleared if
the battery remains dead without being charged for
about one day.
• Recording images without configuring the clock set-
tings causes incorrect time information to be regis-
tered. Be sure to configure the clock settings before
using the camera.
To Next Page
Loading...
Need help?
General
