54
PLAYBACK
Playing an Audio Snapshot (EX-M1 Only)
Perform the steps below to display an audio snapshot (indi-
cated by a indicator) and play its audio.
1.
In the PLAY mode, rock the controller left or
right until the image you want is displayed.
2.
Click the controller.
• This plays back the
audio that accompanies
the displayed image.
• You can perform the
following operations
while audio is playing.
IMPORTANT!
• Audio volume can be adjusted during playback only.
• When you have the LCD remote controller connected
to the camera, audio is output through the stereo
headphones (page 95) instead of the camera’s
speaker. Output through the headphones is monaural.
To do this:
Fast forward or fast reverse
the audio
Pause and unpause audio
playback
Adjust audio volume
Cancel playback
Do this:
Rock the controller left or
right.
Click the controller.
Rock the controller up or
down.
Press MENU.
To Next Page
Loading...
Need help?
General
