42
OTHER RECORDING FUNCTIONS
OTHER RECORDING FUNCTIONS
This chapter describes the other powerful features and func-
tions that are available for recording.
Exposure Compensation (EV Shift)
Exposure compensation lets you change the exposure set-
ting (EV value) manually to adjust for the lighting of your sub-
ject. This feature helps to achieve better results when re-
cording a backlit subject, a strongly lit subject indoors, and a
subject that is against a dark background.
Exposure Compensation Range: –2.0EV to +2.0EV
Steps: 1/3EV
1.
In the REC mode, press MENU.
2.
Select the “REC” tab,
select “EV Shift”, and
then rock the control-
ler to the right.
Exposure compensation
value
3.
Rock the controller up or down to change the
exposure compensation value, and then click.
• Clicking the controller registers the displayed value.
Up : Increases the EV value. A higher EV value is best
used for light-colored subjects and backlight sub-
jects.
Down : Decreases the EV value. A lower EV value is best
for dark-color subjects and for shooting outdoors
on a clear day.
• To cancel exposure compensation, adjust the value
until it becomes zero.
To Next Page
Loading...
Need help?
General
