OTHER SETTINGS
73
Changing the Display Language
You can use the following procedure to select one of six lan-
guages as the display language.
1.
In the REC mode or PLAY mode, press MENU.
2.
Select the “Set Up” tab, select “Language”,
and then rock the controller to the right.
3.
Rock the controller up or down to select the
option you want, and then click.
: Japanese
English : English
Français : French
Deutsch : German
Español : Spanish
Italiano : Italian
Formatting Built-in Memory
Formatting built-in memory deletes any data stored in it.
IMPORTANT!
• Note that data deleted by a format operation cannot
be recovered. Check to make sure you do not need
any of the data in memory before you format it.
• Formatting memory deletes all files in memory, even
files that are protected (page 65).
1.
Check to make sure there is no memory card
loaded in the camera.
• If there is a memory card loaded in the camera, re-
move it (page 75).
2.
In the REC mode or PLAY mode, press MENU.
3.
Select the “Set Up” tab, select “Format”, and
then rock the controller to the right.
4.
Rock the controller up or down to select
“Format”, and then click.
• To exit the format operation without formatting, select
“Cancel”.
To Next Page
Loading...
Need help?
General
