GETTING READY
28
2.
Turn off the camera.
3.
Set the camera onto
the USB cradle.
• Do not place the
camera onto the USB
cradle while it is turned
on.
• The [CHARGE] lamp on
the USB cradle should
turn red, indicating that
charging has started.
When charging is
complete, the
[CHARGE] lamp will
turn green.
4.
After charging is complete, remove the
camera from the USB cradle.
PHOTO
CHARGE
USB
D
I
SP
MENU
SET
R
E
C
PLAY
[CHARGE] lamp
NOTE
• The bundled AC adaptor is designed for operation
with any power supply in the range of 100V to 240V
AC. Note, however, that the shape of the AC power
cord plug varies according to country or geographic
area. If you plan to use the AC adaptor in a
geographic area where the power receptacle shape
is different from that in your area, replace the AC
power cord with one of the other ones that comes
with the camera, or purchase a commercially
available AC power cord that is compatible with the
power outlets in that area.
NOTE
• The AC adaptor is designed for operation on power
ranging from 100V AC to 240V AC. Note, however,
that the shape of the power cord plug varies
according to country or geographic area. It is up to
you to find out if the shape of the AC adaptor power
cord plug is compatible with local power outlets when
traveling abroad.
○○○○○○○○○○○○○○○○○○○○○○○○○○○
AC Adaptor
[DC IN 5.3V]
USB Cradle
To Next Page
Loading...
Need help?
General
