111
Dynamic Photo
Dynamic Photo
You can use the procedures in this section to crop either a moving subject or a still
subject out of a snapshot and then insert it into another snapshot.
1. Press [BS] and then select the “Dynamic Photo” scene.
2. Press [SET], use [8] and [2] to select “Subject Type”, and then press
[SET].
3. Use [8] and [2] to specify the subject type, and then press [SET].
• To create a still subject, select “Still Subject”.
4. Press [SET], use [8] and [2] to select “Number of Shots”, and then
press [SET].
To create a subject image to be inserted (Dynamic Photo)
CS speed
Number of
Shots
Subject type
Moving Subject
1sec (20fps)
20 images per
second
20 shots
Records multiple images of
the subject, which are
cropped and combined to
create movement against the
background image.
Moving Subject
2sec (10fps)
10 images per
second
20 shots
Moving Subject
4sec (5fps)
5 images per
second
20 shots
Still Subject –1 shot
Records a single subject,
which is cropped and inserted
into the background image.
Moving Subject Other Image Dynamic Photo Image
To Next Page
Loading...
Need help?
General
