38
Snapshot Tutorial
With the Self-timer, pressing the shutter button starts a timer. The shutter is released
and the image is shot after a fixed amount of time.
1. In the REC mode, press [SET].
2. Use [8] and [2] to select the fourth Control Panel option from the top
(Self-timer).
3. Use [4] and [6] to select the setting you want and then press [SET].
• The front lamp flashes while the Self-timer countdown
is in progress.
• You can interrupt an ongoing Self-timer countdown by
pressing [SET].
Using the Self-timer (Self-timer)
10 sec Self-timer 10-second Self-timer
2 sec Self-timer
2-second Self-timer
• When shooting under conditions that slow down the
shutter speed, you can use this setting to prevent
image blur due to camera movement.
X3 Self-timer
(Triple Self-timer)
Shoots three images: one image 10 seconds after the
shutter button is pressed, and the next two images as
soon as the camera is ready after shooting the previous
image. How long it takes for the camera to get ready to
shoot depends on the image size and quality settings,
whether or not a memory card is loaded in the camera,
and the flash charge condition.
Self-timer Off Turns off the Self-timer.
Front lamp
To Next Page
Loading...
Need help?
General
