71
Advanced Settings
. Specifying the Method for Saving Continuous Shutter Images
Specify the method to use for saving images recorded with “High Speed CS”.
1. After continuous shutter shooting is finished, use [8] and [2] to
select the save method you want and then press [SET].
• Does not save any of the images while “Cancel Save” is selected.
Save Selected
The shot images are played back at slow speed so you can select the images
you want to save.
1
While the shot images are playing back and an image
appears that you want to save, press the shutter
button. Each image that you select by pressing the
shutter button will have a mark appended to it.
2
After selecting all of the images you want to save,
press [MENU].
3
Use [8] and [2] to select the save method you want and then press [SET].
Save All
Saves all the images.
Mark
Buttons Used for Image Selection
[4] [6]
During playback, changes the playback direction and playback
speed.
While playback is paused, scrolls forward or back.
[SET] Toggles between pause and play.
Shutter
button
Press all the way down to select an image for saving.
[MENU]
Saves the selected images and exits the image select
operation.
Save Selected : Saves selected images.
Save All : Saves all the images.
Cancel Save : Does not save any of the images.
To Next Page
Loading...
Need help?
General
