14
Quick Start Basics
Note that the battery of a newly purchased camera is not charged. Perform the steps
below to load the battery into the camera and charge it.
• Your camera requires a special CASIO rechargeable lithium ion battery (NP-120)
for power. Never try to use any other type of battery.
1. Open the battery cover.
Pressing the battery cover, slide it in
the direction indicated by the arrow.
2. Load the battery.
With the EXILIM logo on the
battery facing downwards (in
the direction of the lens), hold
the stopper next to the battery
in the direction indicated by
the arrow as you slide the
battery into the camera. Press
the battery in until the stopper
secures it in place.
3. Close the battery cover.
Pressing the battery cover against the
camera, slide it closed.
First, charge the battery prior to use.
To load the battery
1
2
EXILIM logo
Battery
OK
NG
Stopper
1
2
To Next Page
Loading...
Need help?
General
