Casio FC-100V User Manual

E-144
4. Wipe a new battery with a dry cloth, and then load it
into the calculator with its positive
k
side facing
upwards (so you can see it).
5. Replace the battery cover and secure it in place with its
screw.
6. Perform the following key operation:
(1) O19(CLR)
(2) “All:EXE” (fc), then E
(3) E(Yes)
(4) A
• Make sure you perform the above key operation. Do
not skip it.
• Replacing the battery initializes the calculator, including
the custom shortcut keys and function shortcut keys.
See “Initializing the Calculator” (page E-3) for more
information.
FC-100V
This calculator is powered by a single AAA-size battery
(R03 (UM-4)).
A Replacing the Battery
Dim figures on the display of the calculator indicate that
battery power is low. Continued use of the calculator when
the battery is low can result in improper operation. Replace
the battery as soon as possible when display figures
becomes dim.
Even if the calculator is operating normally, replace the
battery at least once every two years.
Important!
• Removing the battery from the calculator causes
independent memory contents and values assigned to
variables to be cleared.

Casio FC-100V Specifications

General

Type	Financial
Cover	Yes
Form factor	Pocket
Control type	Buttons
Product color	Gray
Housing material	Plastic
Digits	10 digits
Display type	Dot-matrix
Display tilting	No
Display size (HxV)	31 x 96 mm
Display number of lines	4 lines
Display number of characters	15
Storage media type	Flash
Battery type	AAA
Power source	Battery
Battery life (max)	17000 h
Number of batteries supported	1
Operation	log, ln, 10x, ex, x2/ ^ / x√ , √, x-1, x!, nPr - nCr
Symbolic notation	Fraction, Square root
Conversion between	Decimal, Percent
Package type	Box
Package depth	245 mm
Package width	155 mm
Package height	43.1 mm
Package weight	368.7 g

Weight and Dimensions

Depth	161 mm
Width	80 mm
Height	13.7 mm
Weight	110 g