E-66
A Other DAYS Mode Calculations
Note
• For Example 2 and Example 3, use the setup screen to
change the “Date Mode” setting to “365”.
•Calculation results “d1” and “d2” are not stored in Answer
Memory.
Example 2: To calculate date that falls a specific number
of days (Dys) from a starting date (d1)
1. In step 1 of the basic procedure (Example 1), input 173
for Dys and do not input anything for d2.
2. In step 2, select “d2”.
Example 3: To calculate the date that falls a specific
number of days (Dys) before an ending date
(d2)
1. In step 1 of the basic procedure (Example 1), input 173
for Dys and do not input anything for d1.
2. In step 2, select “d1”.
A DAYS Mode Financial Calculation Variables
(VARS)
•Variables d1, d2, and Dys are used in the DAYS Mode.
• The values of DAYS Mode variables are retained even if
you change to another mode. Note, however, that DAYS
Mode variables are also used by other modes, so
performing an input or calculation operation may change
the values assigned to them.
• Though DAYS Mode variables are financial calculation
variables, variable “Dys” can be recalled in the COMP
Mode.
k Depreciation Mode (FC-200V only)
• The Depreciation (DEPR) Mode lets you use any of the
four methods for depreciation.
SL :Straight-Line Method
FP :Fixed Percentage Method
SYD : Sum-of-the-Year’s Digits Method
DB : Declining Balance Method
To Next Page
Loading...
Need help?
General
Weight and Dimensions
