Casio FC-100V User Manual

E-65
*
2
•You must input two digits for the month and day. This
means you should include a leading zero for values
from 1 through 9 (01, 02, 03... etc.).
•You can specify either month, day, year (MDY) or day,
month, year (DMY) as the date input format. See the
“Date Input” setting under “Configuring Settings” (page
E-16).
Note
•After specifying the 1 Days in Year (Date Mode) in the
Day Calculation Mode, you can calculate any one of the
following three values by inputting values for the other
two: 2 Starting Date (d1), 3 Ending Date (d2), and 4
Number of Days (Dys).
A Basic DAYS Mode Procedure
Example 1: To calculate the number of days between two
dates
1. Input the required values from the Setting Values table
(page E-64).
• For this example, use
fc to select 1 “Set:”,
and then press E.
•Press 2 to select “365”.
•Use fc to select 2
“d1”, input 11052004, and
then press E.
•Use fc to select 3 “d2”, input 04272005, and then
press E.
2. Select the value you want to calculate.
• For this example, use
fc to select “Dys”.
3. Press l to perform the
calculation.

Casio FC-100V Specifications

General

Type	Financial
Cover	Yes
Form factor	Pocket
Control type	Buttons
Product color	Gray
Housing material	Plastic
Digits	10 digits
Display type	Dot-matrix
Display tilting	No
Display size (HxV)	31 x 96 mm
Display number of lines	4 lines
Display number of characters	15
Storage media type	Flash
Battery type	AAA
Power source	Battery
Battery life (max)	17000 h
Number of batteries supported	1
Operation	log, ln, 10x, ex, x2/ ^ / x√ , √, x-1, x!, nPr - nCr
Symbolic notation	Fraction, Square root
Conversion between	Decimal, Percent
Package type	Box
Package depth	245 mm
Package width	155 mm
Package height	43.1 mm
Package weight	368.7 g

Weight and Dimensions

Depth	161 mm
Width	80 mm
Height	13.7 mm
Weight	110 g