1 + 1 = 2
2 + 2 = 4
3 + 3 = 6
Example:
1 1 2
2 2 4
3 3 6
(Scrolls back.) 4
(Scrolls back again.) 2
Note
• Calculation history data is all cleared whenever you press , when you change to a
different calculation mode, when you change the display format, or whenever you
perform the following operations: (CLR) (Setup) (Yes),
(CLR) (All) (Yes).
Replay
While a calculation result is on the display, you can press
or to
edit the expression you used for the previous calculation.
Example: 4 × 3 + 2 = 14
4 × 3 - 7 = 5
4 3 2 14
(Continuing) 7 5
Using Memory Functions
Answer Memory (Ans)/Previous Answer Memory
(PreAns)
The last calculation result obtained is stored in Ans (answer) memory. The
calculation result obtained prior to the last one is stored in PreAns
(previous answer) memory. Displaying the result of a new calculation will
move current Ans memory contents to PreAns memory and store the new
calculation results in Ans memory. PreAns memory can be used only in
the COMP Mode. PreAns memory contents are cleared whenever the
calculator enters another mode from the COMP Mode.
Using Ans Memory to Perform a Series of Calculations
Example: To divide the result of 3 × 4 by 30 (LineIO)
25
To Next Page
Loading...
Need help?
General
