Casio G-Shock G-Squad DW-H5600-2ER User Manual

Training Alert Screen
Indicators
A training alert screen appears on the watch
when a specified target value is reached
during activity measurement.
Indicator: Meaning:
Calories burned target
value reached.
Elapsed time target
value reached.
Travel distance target
value reached.
Note
●
Alerts that can be configured depend
on the activity.
Alert Screen Switching
A training alert screen appears when a
specified target value is reached during
activity measurement.
Example:
●
The watch returns to the running
measurement screen if you press (A) or if
you do not perform any operation for about
nine seconds.
Configuring Interval Timer
Settings
●
To configure
interval timer settings with
the CASIO WATCHES phone app
You can use the CASIO WATCHES phone
app to configure an interval timer that
combines multiple types of timers.
●
For information about interval timers, see
the information below.
l
Overview
Check the connection
●
Make
sure
the
e
symbol is shown on the
watch display when you perform the
procedure below. If
e
is not displayed,
refer to the information at the link below.
l
Connecting with a Phone Paired
With the Watch
1.
Y
Tap the “CASIO WATCHES
” icon.
2.
Y
Tap the “My Watch” tab.
3.
Y
Select “DW-H5600
” and tap it.
4.
Y
Select the setting you want to change
and then perform the operation shown on
the screen.
●
To
configure
interval timer settings with
the watch
●
If a timer countdown operation is in
progress, reset the timer to its current start
time before performing this operation.
l
Using the Timer
1. Display the current time screen.
l
Watch Mode
2. Press (A).
This enters the Activity Mode.
3. Use (C) to select [INTERVAL TIMER].
4. Press (A).
5. Hold down (C) for at least two seconds.
This displays the interval training setting
screen.
Pointer
6. Use (C) to move the pointer to [INTERVAL
TIMER].
7. Press (A).
This displays the interval timer setting
screen.
8. Use (C) to move the pointer to [REPEAT].
9. Press (A).
This
displays the number of timer repeats
(1 to 10) setting screen.
Number of repeats
10. Use (C) to specify the number of timer
repeats (Auto Repeat).
11. Press (A).
After the setting operation is complete, a
check mark appears for a few seconds,
and then the interval timer setting screen
re-appears.
12. Use (C) to specify the sequence of the
timers.
●
To setup
the first timer, setup [TIMER1].
Timer sequence
Watch Operation Guide 3516
53

Casio G-Shock G-Squad DW-H5600-2ER Specifications

General

Brand	Casio
Model	G-Shock G-Squad DW-H5600-2ER
Category	Watch
Language	English