Casio Oceanus OCW-G2000S-1A User Manual

3.
Y Perform the operation shown on the
phone screen to swap your Home Time
with your World Time.
For example, if your Home City is Tokyo
and
the World Time City is New York, they
will be swapped as shown below.
●
The second hand will point to the time
zone of the currently selected World
Time City for a few seconds after you
swap times.
30 30
World Time City
(New York)
World Time City
(Tokyo)
Home City (New York)
Home City (Tokyo)
After swappingBefore swapping
Note
●
Auto
time adjustment does not work
for 24 hours after swapping of the
Home Time and World Time.
Adjusting Hand and Day
Indicator Alignment
If the hands and/or date indicator are out of
alignment even though auto time adjustment
is being performed, use OCEANUS
Connected to adjust them.
1.
Y Tap the
“OCEANUS Connected” icon.
2.
X Hold down (C) for about 2.5 seconds.
This causes the second hand to move to
“C” and establishes a connection
between the watch and phone.
●
The second hand will point to
“N” if
connection fails for some reason.
3.
Y Perform the operation shown on the
phone screen to correct hand and day
indicator alignment.
Configuring Watch Settings
You can use OCEANUS Connected to specify
the amount of time until the Bluetooth
connection
is automatically terminated, and to
configure other settings.
1.
Y Tap the
“OCEANUS Connected” icon.
2.
X Hold down (C) for about 2.5 seconds.
This causes the second hand to move to
“C” and establishes a connection
between the watch and phone.
●
The second hand will point to
“N” if
connection fails for some reason.
3.
Y Select the setting you want to change
and then perform the operation shown on
the phone screen.
Changing the Home City
Summer Time Setting
1.
Y On the Home Screen, tap the
“OCEANUS Connected
” icon.
2.
X Hold down (C) for about 2.5 seconds.
This causes the second hand to move to
“C”
and establishes a connection
between the watch and phone.
●
The second hand will point to
“N” if
connection fails for some reason.
3.
Y Perform the operation shown on the
phone
screen to change your World Time
summer time setting.
Checking the Watch Charge
Level
Use the procedure below to check the current
charge level with OCEANUS Connected.
1.
Y On the Home Screen, tap the
“OCEANUS Connected
” icon.
2.
X Hold down (C) for about 2.5 seconds.
This causes the second hand to move to
“C”
and establishes a connection
between the watch and phone.
●
The second hand will point to
“N” if
connection fails for some reason.
3.
Y Use
OCEANUS Connected to check the
charge level.
Connection
Connecting with a Phone
This section explains how to establish a
Bluetooth
connection between a phone that is
paired with the watch.
●
If
the watch is not paired with the phone you
want to connect with, perform the procedure
under “C Pair the watch with a phone.” to
pair them.
1.
Move
the phone close to (within one meter
of) the watch.
2.
X While
the second hand is not pointing to
“C”, hold down (C) for about 2.5 seconds.
This causes the second hand to move to
“C” and establishes a connection
between the watch and phone.
●
The second hand will point to
“N” if
connection fails for some reason.
Operation Guide 5501
10

Casio Oceanus OCW-G2000S-1A Specifications

General

Brand	Casio
Model	Oceanus OCW-G2000S-1A
Category	Watch
Language	English