78
When an error occurs…
This section describes what to do when you have problems with operation.
Errors are indicated by an error tone. When this happens, you can usually find out what the problem is as
illustrated below.
ERROR TONE
Does the display show an error code?
No Yes
48
4
4
4
4
4
4
4
4
4
4
4
4
Press c key and check the appropriate section of this manual for the operation you want to perform.
Error Code Meaning Action
———————————————————————————————————————
E01 Mode Switch position changed Return the Mode Switch to its
before finalization. original setting and finalize the
operation.
———————————————————————————————————————
E08 Registration without entering a clerk Enter a clerk number.
number. This error appears only
when the clerk control function is
activated.
———————————————————————————————————————
E27 Transaction cancel buffer is full. Finalize the transaction.
———————————————————————————————————————
E31 Finalization of a transaction Press the S key.
attempted without comfirming the
subtotal.
———————————————————————————————————————
E33 Finalize operation attempted without Enter the amount tendered.
entering amount tendered.
———————————————————————————————————————
E38 READ/RESET operation without Perform money declaration.
declaring cash in drawer. This error
appears only when this fuction is
activated.
———————————————————————————————————————
E94 Printer error. Turn the power off, and remove
jammed paper from the printer.
Troubleshooting
To Next Page
Loading...
Need help?
General
