E-19
Other Settings
Changing the Keyboard Touch
1
This setting changes the relative touch of the
keyboard keys.
Changing the Piano Key
2
Use this setting to raise or lower the overall key of
the keyboard in semitone steps.
Changing the Pitch of the Piano
to Match Another Instrument
3
Use this setting to raise or lower the overall pitch
of the piano. The setting range is plus or minus 50
cents (100 cents = 1 semitone) from the standard
pitch of A4 = 440.0Hz.
1
While holding down the CONTROL
button, use the keyboard keys shown below
to select the keyboard setting you want.
1
Changing the Keyboard Touch
Off
Weak (Strong sound is produced even when
relatively light pressure is applied.)
Normal
Strong (Normal sound is produced even when
relatively strong pressure is applied.)
2
Changing the Piano Key
Higher (C
to F)
Normal (C)
Lower (F
to B)
3
Changing the Pitch of the Piano to Match
Another Instrument
+: Raise
– : Lower
* Each press of a key changes the current setting by
approximately 1 cents (1/100 semitone).
NOTE
• Holding down the CONTROL button and pressing
keyboard keys “–” and “+” at the same time returns
tuning to the standard A4 = 440.0Hz.
Off Normal
C4 : Normal
13
+
: Raise
–
: Lower
2
Lower Higher
▲
C1
▲
C2
▲
C3
▲
C4
▲
C5
▲
C6
▲
C7
▲
C8
Weak Strong
CONTROL
412A-E-021A