E-16
You can save music data for up to 10 tunes you
download from the Internet to the digital piano’s user
song area (No. 0 through 9). Once you store a song in
digital piano memory, you can play it back using the
following procedure.
1
Press the USER SONG button so the USER
SONG indicator lamp (below the button)
is lit.
• Each press of the button toggles between the
upper indicator lamp and lower indicator lamp.
2
While holding down the FUNCTION
button, press the keyboard keys shown
below to input a tune number.
3
Press the START/STOP button.
• This starts the playback of the tune.
4
Press the START/STOP button again to stop
tune playback.
Playing Tunes You Download from the Internet
NOTE
• You can also cycle through the available tunes in
step 2 by holding down the FUNCTION button and
pressing the RHYTHM/SONG SELECT [
] or
[
] button.
• Pressing the two RHYTHM/SONG SELECT
buttons at the same time selects tune 0.
• You cannot use layer or split while playing a tune.
FUNCTION
USER SONG
T1/L T2/R
START/
STOP
RHYTHM/
SONG SELECT
407A-E-018A
To Next Page
Loading...
Need help?
General
