Digital Piano Operations
EN-22
● Reverb
• To return to the initial default setting (Hall 3), touch
bk – and bl + at the same time.
4.
After the setting is the way you want, touch
bp EXIT as many times as required until
“[SOUND MODE]” disappears from the display.
■ To adjust the depth of the hall simulator/reverb
effect
1.
Hold down bn SOUND MODE until “[SOUND
MODE]” appears on the display, and then
release the button.
2.
Use the bk U and bl I buttons to display one
of the setting items below and then touch
bm ENTER.
3.
Use the bk – and bl + buttons to change the
setting.
• You can specify a value from 0 to 127. The larger the
value, the greater the effect depth.
4.
When the setting you want is selected, touch
bp EXIT.
5.
Repeat steps 2 through 4 as required.
6.
After the setting is the way you want, touch
bp EXIT.
■ To specify the Surround type
1.
Hold down bn SOUND MODE until “[SOUND
MODE]” appears on the display, and then
release the button.
2.
Use the bk U and bl I buttons to display
“Surround Type” and then touch bm ENTER.
The name of the currently selected surround type will be
shown on the display.
3.
Use the bk – and bl + buttons to select the
surround type (Type 1 or Type 2).
4.
After the setting is the way you want, touch
bp EXIT as many times as required until
“[SOUND MODE]” disappears from the display.
Type (displayed) Description
Room 1
Simulates the reverberation of a room.
Room 2
Room 3
Large Room
Hall 1
Simulates the reverberation of a small
hall.
Hall 2
Hall 3
Stadium Simulates the reverberation of a
stadium.
With this menu
item (displayed):
You can do this:
Hall/Rev. Depth Adjust the depth of the Hall Simulator
and Reverb effects applied to the
Digital Piano’s built-in sound source.
AudioInHallDepth Adjust the depth of the Hall Simulator
and Reverb effects applied to audio
input from an audio device connected
to the Digital Piano’s ct AUDIO IN
jack.
To Next Page
Loading...
Need help?
General
