— 85 —
Prompt message Meaning Action
E048 Insert Slip Paper and
retry.
Alarm when no paper is inserted in the
Slip.
Insert new slip paper.
E049 CHECK memory full. Check tracking index full/near end Finalize and close the check number
currently used.
E050 Detail memory full. Check tracking memory full/near end Finalize and close the check number
currently used.
E051 CHK/TBL No. is occupied. Attempt is made to use the <NEW
CHECK> key to open a new check using a
number that is already used for an existing
check tracking memory.
Finalize and close the check that is
currently under the number that you want
to use or use a different check number.
E052 CHK/TBL No. is Busy. Attempt to use the same check number
whilst the specified number is being used
in the other terminal.
Use another check number or close the
check at that terminal.
E053 CHK/TBL No. is not
opened.
Check number not found Use the correct check number (if you want
to reopen a check that already exists in
the check tracking memory) or use <NEW
CHECK> to open a new check.
E054 Out of CHK/TBL No.
Range.
Check number range over Enter correct number.
E056 Store range full. All check number are occupied in range. Recall the stored data.
E057 No item exists in detail. Round repeat cannot be found in detail.
E058 Enter post entry item. Post entry item has not been registered
yet.
Enter Post entry item.
E059 Press Eat-in or Take-out
key.
Press eat-in or take-out key. Press Eat-in or Takeout key.
**********
E060 Printer offline.
Printer offline.
“****” means ECR logical ID and printer
number.
**********
E061 Printer error.
Printer downed.
“****” means ECR logical ID and printer
number.
The contents are printed on the backup
printer.
**********
E061 Printer error.
YES : Retry to print.
NO : Show on the screen.
ESC : Discard data.
Printer downed.
“****” means ECR logical ID and printer
number.
Follow the prompt message.
**********
E062 Printer paper end.
Paper near-end/end “****” means ECR
logical ID and printer number.
Set new paper.
The contents are printed on the backup
printer.
**********
E062 Printer paper end.
YES : Retry to print.
NO : Show on the screen.
ESC : Discard data.
Paper near-end/end “****” means ECR
logical ID and printer number.
Follow the prompt message.
E064 Printer buffer full.
YES : Retry to print.
NO : Show on the screen.
ESC : Discard data.
Print buffer full at sender side Follow the prompt message.
**********
E070 Terminal out of action.
Cannot print.
Down at target ECR which has printer
“****” means ECR logical ID and printer
number.
**********
E071 Target terminal printer BF
full.
YES : Retry to print.
NO : Show on the screen.
ESC : Discard data.
Printer buffer full at target ECR which has
printer
“****” means ECR logical ID and printer
number.
Follow the prompt message.
To Next Page
Need help?
General
