E-14
To change taxable statuses of departments
By default, taxable statuses of departments are as follows.
Dept. 2: Taxable status 1
Depts. 1, and 3 through 24: Non-taxable.
You can change the statuses by the following operations.
Sample Operation
Setting Depts. 1 through 4 as non-taxable and Depts. 9 through 11 as taxable 1.
Step Operation
1 Press Zk then ~ to set the register in
tax program mode.
Zk~
2 Press corresponding tax status setting key
(see the table below) rst then press Dept.
keys you wish to set. The example on the
right is for setting Depts. 1 through 4 as non-
taxable.
asdf
A (Depts. 1 through 4)
3 Depts. 9 through 24 are assigned by combi-
nations of j and Depts. keys. The example
on the right is for setting Depts. 9 through 11
as taxable status 1.
cjajsjd
A ( Depts. 9 through 11 )
4 Press k to complete the settings.
k
Taxable status selections
Taxable status 1
c
A
Taxable status 2
v
Taxable status 1 and 2
cv
Taxable status 3
x
Taxable status 4
u
Non-taxable
Further operations:
• “To set tax tables and rounding system” on page E-41.
Mode SwitchMode Switch
To use the cash register’s basic function
SES700_INC-e.indb 14 2013/09/02 11:27:46
To Next Page
Loading...
Need help?
General
