13
Getting Started
E
Be sure to check the sticker (rating plate) on the side of the cash
register to make sure that its voltage matches that of the power
supply in your area.
When the display shows “Low battery”, load memory protection batteries (refer to page 10).
3. Plug the cash register into a wall outlet.
4.
Insert the mode key marked “PGM” into the mode switch.
5. Turn the mode switch to the “PGM” position.
6. Set the date.
7. Set the time.
1. Enter current date in year - month - day order, and press the <X/FOR>
Example: June 15, 2008 2 080615x
2. Press <C> key.
Example: C
1. Enter current time in 24 hour system, and press the <X/FOR>
Example: 08:30 AM 2 0830x (9:45 PM 2 2145x)
2. Press <C> key.
Example: C
X
REG
OFF
RF
PGM
Z
X2/Z2
P
01
~00
RPT
AMOUNT
T1 T2 T3 T4
TOTAL CHANGE
OP
PGM
X
REG
OFF
RF
PGM
To Next Page
Loading...
Need help?
General
