19
This section explains the procedure for logging in to the projector’s System Admin page from a
computer and configuring wireless LAN connection security settings.
To log in to the projector’s System Admin page
1.
Perform the procedure under “To use a default SSID to connect a computer to
the projector via wireless LAN” (page 15) up to step 6 to establish a wireless LAN
connection between the projector and computer.
2.
On a Wireless Connection 3 window, click the function menu button and then
click [Admin Screen] on the menu that appears.
z This starts up the computer’s web browser and displays the projector’s top System Admin
page.
3.
Click “System Admin”. On the password input screen that appears, enter the
password.
z The initial default password is “admin”.
Configuring Security Settings
Function menu button
To Next Page
Loading...
Need help?
General
