Fixing the Oven
Introduce the oven into the furniture opening and fix it with screws (not supplied) as figure 20.
It is essential that the oven rests on a surface which will support its weight, as the screw fixing is only
complementary.
Note
It is essential that when installing your oven adequate air circulation is allowed for within the installation.
See figures 18 - 19.
Inadequate air circulation may greatly impair the performance of your oven and may effect adjacent
cabinets due to an increase in temperature.
Caution
Do not lift this oven by the door handle
Adjust the hinges of furniture doors adjacent to the oven to allow a 4-5 mm gap between the furniture
door and the oven frame.
Fig. 20
To Next Page
Loading...
Need help?
General
