4
Control Panel
Power button (1)
• To switch the dishwasher on or o, press the power button (1). When you switch on the dishwasher, the end of
programme light will illuminate, and two dashes will appear on the display.
The interior light will work automatically when the dishwasher is switched on.
Programme display (2)
The programme display shows the selected programme and the remaining time to run. If there is a fault on the
dishwasher, the fault code will show on the display.
Programme selection button (3)
• To select a programme, press the programme selection button (3). The dishwasher will store in its memory the last
programme used.
Delay timer button (4)
The dishwasher is equipped with a variable timer of up to 19 hours’ duration at hourly intervals.
• To set the delay timer, press the delay timer button (4). This will switch the timer on for one hour.
• To change the delay duration, press the delay timer button again until the required delay duration is shown on the
display, alternating with the selected programme and the programme duration.
• To cancel the delay timer, press the delay timer button again until 0h shows on the display.
3 in 1 function button (5)
The dishwasher is equipped with a tablet function that automatically adjusts the amount of rinse aid and dishwasher salt
used during a programme when combined tablets are used.
• To use this function, press the button after selecting the programme, before you close the door.
Prewash button (6)
The dishwasher is equipped with a prewash function that automatically adds a prewash to the selected programme.
The prewash function improves the wash performance of the programme, but also can change the temperature and
duration of the programme.
• To use this function, press the button after selecting the programme, before you close the door.
P
P
Fig. 1
To Next Page
Loading...
Need help?
General
