To Next Page

To Previous Page

④ High alarm and low alarm symbol

⑤ ℃/℉ symbol

⑥ Low power symbols

⑦ Emissivity symbol and value

⑧ Temperature values for the MAX

⑨ Symbols for MAX

⑩ Current temperature value

4. Buttons

① Up button (for EMS,HAL,LAL)

② Down button (for EMS,HAL,LAL)

③ MODE button

(for cycling through the

mode loop)

Functional Design

1. the switches of C/F sat in a cell switching

2. In the measuring time up, down keys to adjust the

Emissivity.

3. IN the hold time, up keys to turn on or off the laser

Down keys to turn on or off the backlight

4. To set values for the High Alarm (HAL), Low Alarm (LAL)

and Emissivity (EMS), press the MODE button until the

Questions and Answers:

Need help?

Do you have a question about the CEM DT-8861 and is the answer not in the manual?

CEM DT-8861 Specifications

General