Challenge Xtreme CX-TS 800 User Manual

2. Items supplied
• Carbide-tippedsawblade
• Parallelstop
• Pushstick
• Bench-typecircularsaw
• Crossstop
• 2xcombinedringwrench/facespanners.
3. Proper use
The bench-type circular saw is designed for the
slitting and cross-cutting of all types of timber,
commensurate with the machine’s size. The machine
is not to be used for cutting any type of roundwood.
The machine is to be used only for its prescribed
purpose.
Any use other than that mentioned is considered to
be a case of misuse. The user/operator and not the
manufacturer shall be liable for any damage or injury
resulting from such cases of misuse. The machine
is to be operated only with suitable saw blades. It is
prohibited to use any type of cutting-off wheel.
To use the machine properly you must also observe
the safety regulations, the assembly instructions and
the operating instructions to be found in this manual.
All persons who use and service the machine have to
be acquainted with this manual and must be informed
about its potential hazards.
It is also imperative to observe the accident
prevention regulations in force in your area. The
same applies for the general rules of occupational
health and safety.
The manufacturer shall not be liable for any changes
made to the machine nor for any damage resulting
from such changes.
Even when the machine is used as prescribed
it is still impossible to eliminate certain residual
risk factors. The following hazards may arise in
connection with the machineʼs construction and
design:
• Contactwiththesawbladeintheuncoveredsaw
zone.
• Reachingintotherunningsawblade(cutinjuries).
• Kick-backofworkpiecesandpartsofworkpieces
• Sawbladefracturing.
• Catapultingoffaultycarbidetipsfromthesaw
blade.
• Damagetohearingifessentialear-muffsarenot
worn.
• Harmfulemissionsofwooddustwhenthemachine
is used in closed rooms.
Please note that our equipment has not been
designed for use in commercial, trade or industrial
applications.Ourwarrantywillbevoidedifthe
machine is used in commercial, trade or industrial
businesses or for equivalent purposes.
Helpline No 0844 801 8701 / IRE 189 094 6244
9

Challenge Xtreme CX-TS 800 Specifications

General

Brand	Challenge Xtreme
Model	CX-TS 800
Category	Saw
Language	English