allow the machine to come to a standstill. Pull the
plug and carry out the following work:
- Check the machine for signs of damage
- Check that all the parts are secure and tighten
them if necessary.
- Have any damaged parts replaced or repaired,
but use only spare parts of the same type and
equivalent quality
앬 If the machine is blocked switch off the motor and
pull the plug before you start the cleaning
procedure. Ensure that the motor is clear of waste
and other accumulations to protect the motor from
suffering damage or possibly catching fire.
앬 Ensure that all the covers and guards are in
position and in good working order.
앬 Do not tip the machine whilst the motor is running.
앬 Switch off the machine before you fit or remove
the collection container.
앬 The tool may only be used outdoors (i.e. not in the
vicinity of a wall or any other ridged object)
앬 Damaged or illegible labels must be replaced
앬 Allow the tool to cool before carrying out any main
tenance work, adjustments, etc.
앬 Never use the machine while other people are
nearby.
앬 When inserting material take special care to
ensure that it does not contain any metal, stones,
bottles, cans or other foreign bodies.
앬 Do not allow processed material to accumulate
within the discharge area; this could prevent the
machine being able to discharge correctly and
result in material recoiling through the infeed
opening.
앬 When servicing the cutting tool, remember that it
may still be moving due to the starting
mechanism, even if the motor is not running
because of the cover interlock.
앬 Children must not be permitted to use the
machine.
앬 Wear ear protectors and safety goggles. Wear
these throughout the time the machine is in
operation.
앬 Before starting the machine, check all screws,
nuts, bolts and other fastening materials to ensure
that they are secure and that all covers and
guards are in position. Damaged or illegible labels
must be replaced.
앬 The device must only be supplied via a residual
current device with max. 30mA tripping current.
2. Technical data
Voltage: 230 V ~ 50 Hz
Power rating: 2500 W (S6-40%)
2000 W (S1)
Cutting unit idling speed
40 min
-1
Branch diameter: max. 40 mm
L
pA
sound pressure level: 88 dB (A)
L
WA
sound power level: 106 dB (A)
Weight: 28 kg
S6 (40%) stands for a duty cycle based on 4 minutes
on-load and 6 minutes off-load operation. Maximum
power consumption depends on the consistency of
the material being shredded.
3. Layout and items supplied (Fig. 1-3)
1. Motor unit
2. Shredded material debris box
3. Base frame
4. Wheels
5. Wheel caps
6. Knob for setting the counter blade
7. Integral power plug
8. Transport handle
9. Reverse running switch
10. ON/OFF switch
11. Legs (including fastening screw)
12. 3x screws for fitting the motor unit
13. 3x washers for fitting the motor unit
14. 2x sets of screws for fitting the wheels (including
wheel sleeves, washers and nuts)
15. 2x open-ended spanners (10/13 mm)
16. 1x Philips screwdriver
4. Proper use
This electric garden refuse shredder is designed only
for shredding organic garden waste. Place biologi-
cally degradable material, e.g. leaves, branches,
dead flowers etc., into the loading funnel inlet.
Please note that our equipment has not been
designed for use in commercial, trade or industrial
applications. Our warranty will be voided if the
machine is used in commercial, trade or industrial
businesses or for equivalent purposes.
8
Helpline No: UK 0151 649 1500 / IRE 189 094 6244
GB
To Next Page
Loading...
Need help?
General