How
to
Wear
Safety Belts Properly
Adults
This part is only for people
of
adult size.
Be aware that there are special things to know about
safety belts and children. And there are different
rules for smaller children and babies. If
a
child will
be riding in your vehicle, see the part of this
manual called “Children.” Follow those rules for
everyone’s protection.
First, you’ll want to know which restraint systems your
vehicle has.
We’ll start
with
the driver position.
Driver Position
This part describes the driver’s restraint system.
Lap-Shoulder
Belt
The driver has a lap-shoulder belt. Here’s how to wear
it properly.
1.
Close and lock the door.
2.
Adjust the seat (to see how, see “Seats” in the Index)
so
you can sit up straight.
3.
Pick up the latch plate and pull the belt across you.
Don’t let it get twisted.
The shoulder belt may lock
if
you pull the belt across
you very quickly. If this happens, let the belt
go
back
slightly to unlock it. Then pull the belt across you
more slowly.
4.
Push the latch plate into the buckle until it clicks.
Pull up on the latch plate to make sure it is secure.
If the belt isn’t long enough, see “Safety Belt
Extender” at the end of this section.
To Next Page
Loading...
