Chevrolet 2002 S10 Pickup User Manual

2-41
Turn Signal/Multifunction Lever
The lever on the left side of the steering column
includes the following:
D Turn and Lane
-Change Signals
D Headlamp High/Low
-Beam Changer
D Flash
-to-Pass Feature
D Windshield Wipers
D Windshield Washer
D Cruise Control (If Equipped)
Turn and Lane-Change Signals
The turn signal has two upward (for right) and two
downward (for left) positions. These positions allow you
to signal a turn or a lane change.
To signal a turn, move the lever all the way up or down.
When the turn is finished, the lever will return automatically.
An arrow on the instrument
panel cluster will flash in
the direction of the turn or
lane change.
To signal a lane change, just raise or lower the lever
until the arrow starts to flash. Hold it there until you
complete your lane change. The lever will return by
itself when you release it.
As you signal a turn or a lane change, if the arrows don’t
flash but just stay on, a signal bulb may be burned out
and other drivers won’t see your turn signal.
If a bulb is burned out, replace it to help avoid an
accident. If the arrows don’t go on at all when you
signal a turn, check the fuse (see “Fuses and Circuit
Breakers” in the Index) and for burned
-out bulbs.

Chevrolet 2002 S10 Pickup Specifications

General

Brand	Chevrolet
Model	2002 S10 Pickup
Category	Automobile
Language	English