Chevrolet 2010 Aveo Series User Manual

Headlamps
To replace a headlamp bulb:
1. Open the hood. See Hood Release on page 6‑12.
2. Remove the three bolts to remove the headlamp
assembly.
3. Disconnect the wiring harness connector from the
rear of the bulb.
4. Remove the headlamp cap.
5. Release the spring that retains the bulb by
loosening the screw.
6. Remove the old bulb and install the new bulb.
7. Install the bulb retaining spring and tighten the
screw.
8. Reinstall the headlamp cap.
9. Reconnect the wiring harness at the rear of
the bulb.
6-44
Information Provided by:

Chevrolet 2010 Aveo Series Specifications

General

Brand	Chevrolet
Model	2010 Aveo Series
Category	Automobile
Language	English