Chevrolet 2010 Camaro User Manual

Replacing Safety Belt
System Parts After
a Crash
{ WARNING
A crash can damage the
safety belt system in the vehicle.
A damaged safety belt system may
not properly protect the person
using it, resulting in serious injury
or even death in a crash. To help
make sure the safety belt systems
are working properly after a crash,
have them inspected and any
necessary replacements made as
soon as possible.
After a minor crash, replacement of
safety belts may not be necessary.
But the safety belt assemblies
that were used during any crash
may have been stressed or
damaged. See your dealer/retailer
to have the safety belt assemblies
inspected or replaced.
New parts and repairs may be
necessary even if the safety belt
system was not being used at
the time of the crash.
Have the safety belt pretensioners
checked if the vehicle has been in a
crash, or if the airbag readiness light
stays on after you start the vehicle or
while you are driving. See Airbag
Readiness Light on page 4-17.
Airbag System
The vehicle has the following
airbags:
• A frontal airbag for the driver.
• A frontal airbag for the right front
passenger.
• A seat-mounted side impact
airbag for the driver.
• A seat-mounted side impact
airbag for the right front
passenger.
The vehicle may also have the
following airbags:
• A roof-rail airbag for the driver
and the passenger seated
directly behind the driver.
• A roof-rail airbag for the
right front passenger and the
passenger seated directly behind
the right front passenger.
Seats and Restraints 2-21

Chevrolet 2010 Camaro Specifications

General

Brand	Chevrolet
Model	2010 Camaro
Category	Automobile
Language	English