Lap Belt
This part is only for the lap belt. To learn how to wear a
lap-shoulder belt, see Lap-Shoulder Belt on page 1-24.
You vehicle may have a center seating position.
When you sit in the center front or rear seating position,
you may have a lap safety belt, which has no retractor.
To make the belt longer, tilt the latch plate and pull it
along the belt.
To make the belt shorter, pull its free end as shown
until the belt is snug.
Buckle, position and release it the same way as the lap
part of a lap-shoulder belt. If the belt is not long
enough, see Safety Belt Extender on page 1-28.
Make sure the release button on the buckle is positioned
so you would be able to unbuckle the safety belt
quickly if you ever had to.
1-27
To Next Page
Loading...
Need help?
General
