3-6
Ventilation System
For mild outside temperatures, when little heating or
cooling is needed, you can direct outside air through
your vehicle.
Slide the air intake lever to outside air and the airflow
lever to bi
-level. Adjust the temperature control lever to
a comfortable setting and slide the fan lever toward the
fan symbol.
Your vehicle’s flow
-through ventilation system
supplies outside air into the vehicle when it is moving.
Outside air will also enter the vehicle when the fan is
running and the air intake lever is at outside air.
Your vehicle has air outlets
that allow you to adjust the
direction and amount of
airflow inside the vehicle.
You can direct the airflow side
-to-side by moving the
control located in the center of the vent. The vent can
be tilted up and down also. To control the amount of
airflow though the outlets, turn the thumbwheel below
the vent. The airflow from this vent cannot be controlled
by the airflow lever.
Ventilation Tips
Keep the hood and front air inlet free of ice, snow or
any other obstruction (such as leaves). The heater and
defroster will work far better, reducing the chance of
fogging the inside of your windows.
When you enter a vehicle in cold weather, move the fan
control lever toward the fan symbol for a few moments
before driving off. This helps clear the intake ducts of
snow and moisture, and reduces the chance of fogging
the inside of your windows.
Keep the air path under the front seats clear of objects.
This helps air to circulate throughout your vehicle.
To Next Page
Loading...
Need help?
General
