OMM-23-1009-page 9
Fig. 4 Vibration Severity Chart
BEFORE STARTING ANY INSPECTION OR MAINTENANCE, BE SURE BLOWER IS TURNED OFF, POWER IS LOCKED
OUT AND THE BLOWER WHEEL HAS BEEN CAREFULLY SECURED TO PREVENT WIND MILLING. IF THE
OPERATING CONDITIONS OF THE BLOWER ARE TO BE CHANGED (SPEED, PRESSURE, TEMPERATURE, ETC.)
CONSULT CINCINNATI FAN, OR OUR SALES OFFICE FOR YOUR TERRITORY, TO DETERMINE IF THE UNIT WILL
OPERATE SAFELY AT THE NEW CONDITIONS.
WARNING
V. ROUTINE INSPECTION & MAINTENANCE
Periodic inspection of all the blower parts is the key to good maintenance and trouble-free operation. The frequency of
inspections must be determined by the user and is dependent upon the severity of the application. BUT, it should
NEVER exceed a 12 month period. The user should prepare an inspection and maintenance schedule and make sure
it is adhered to.
To Next Page
Loading...
Need help?
General
