2-2
Cisco Video Surveillance 6400 IP Camera Installation Guide
OL-28494-01
Chapter 2 Camera Installation
Warnings Before Installation
Warnings Before Installation
Warning
Installation of the equipment must comply with local and national electrical codes.
Statement 1074
Warning
The power supply must be placed indoors.
Statement 331
Note If you use the IP camera outdoors, place the camera and the power supply in a suitable NEMA
enclosure.
• Power off the Network Camera as soon as
smoke or unusual odors are detected.
Contact your distributor in the event of this
happening.
• Refer to your user's manual for the
operating temperature.
• Do not place the Network Camera on
unsteady surfaces.
• Do not touch the Network Camera during a
lightning storm.
• Do not insert sharp or tiny objects into the
Network Camera.
• Do not drop the Network Camera.
To Next Page
Loading...
Need help?
General
